Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace the Ford Focus headlight bulb

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Headlight bulb
Operation: How to replace the Ford Focus headlight bulb

If you want to replace the bulb inside the headlight of your Ford Focus Mk2 then this is the guide for you. Thanks to the method we are going to describe, in fact, you can carry out the entire operation in total autonomy and without the slightest difficulty. First, turn off the car completely and preferably disconnect the battery so as to eliminate any passage of electric current. Then open and lift the front hood. Unscrew all the screws holding the headlight in place and pull it towards you. Once this is done, remove the protective cover by acting on the safety hook and proceed with the replacement of the bulb. Finally, refit the cover and reposition the headlight correctly. Re-tighten the screws and close the hood.


Posted on 5 November 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 1998-2004 - How to replace the headlight bulb on a Ford Focus? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos