Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Dismantling the Window Regulator Mechanism

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Power window motor

See other generations:
Video tutorial

To dismantle the window regulator mechanism of the front door, first remove the door panel: locate the fixing screws and disengage the clips along the edges; once the panel is removed, take out the speaker, connect the switch panel, and lower the glass to access the fixing clips of the glass itself; then loosen the fixing pins of the clips, slide out the glass, and proceed to dismantle the fixing pins of the window regulator mechanism, disconnect the power connector of the motor, and extract the mechanism from the door.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Replacing the Window Regulator Motor on a Ford Focus
Replacing the Window Regulator Motor on a Ford Focus
Ford Focus (1998-2004 / MK 1) Need to remove the window regulator motor from inside the door? Here’s how to remove the window regulator motor from a Ford Focus. Unscrew the screws…
How to Replace the Window Switch on a Ford Focus
How to Replace the Window Switch on a Ford Focus
Ford Focus (2011-2018 / MK 3) Today's guide shows how to remove and replace the window switch on a Ford Focus, following the instructions below. First, open the front door of your…
How to Repair the Rear Window Regulator on a Ford Focus
How to Repair the Rear Window Regulator on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) A common fault not only in Ford vehicles is the breakage of the plastic sliding pads in the window regulator mechanism: in this case, you can either …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos