Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to refit the exterior rearview mirror

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Outside rearview mirror
Operation: How to refit the exterior rearview mirror

If you have to mount the outside rearview mirror (not motorized), this video may be useful to you; unfortunately, we must point out that only the part relating to the assembly of the new mirror is shown here, while the procedure for removing the mirror to be replaced is not explained. In any case, with a minimum of practical sense and a little intuition for the parts of the procedure not considered in the tutorial, you can save a lot of money by spending only on the purchase of the mirror, even for competitors. without turning to the care of the body shop. The car in this video is a Ford Focus.


Posted on 21 June 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 1998-2004 - How much does the Ford Focus 2002 right rearview mirror cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos