Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Fiesta
  6. : How do you replace the rear brake shoes on a Ford Fiesta?

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Drums and shoes
Operation: How do you replace the rear brake shoes on a Ford Fiesta?

In order to replace the rear brake shoes on the Ford Fiesta, the car must be lifted using a jack or a bridge, so that the corresponding wheel is not in contact with the floor: in this way it will be possible to loosen the bolts that fix this wheel , removing it and accessing the components on its back. The drum can now be removed by unscrewing the fixing screws and thus accessing the underlying brakes: these can be removed by disconnecting the jaws from the relative mechanism and replacing them with new spare parts. After replacement, all removed parts can be reassembled.


Posted on 23 November 2022 by ScegliAuto



How do you replace the brake shoes on the Ford Fiesta?
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) In order to replace the brake shoes of the Ford Fiesta you have to loosen the screws that fix the wheel corresponding to the brake shoes to be replac
Ford Fiesta rear brake shoes replacement
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) In this video tutorial we will see how to go to replace the rear brake shoes of a Ford Fiesta. First we are going to remove our drum by unscrewing th
Replacing the rear shoes on the Ford Fiesta MK6
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) Today we will see the main steps that will allow us to disassemble and replace the rear brake shoes on the sixth series Ford Fiesta. First we lift th

    Frequently Asked Questions

    • Fiesta 2002-2008 - What is the tightening torque of the drum nut on a Ford Fiesta? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos