Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to replace brake pads on a Ford Fiesta

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Brake pads
Operation: How to replace brake pads on a Ford Fiesta

Today I will show you how to replace the brake pads on our Ford Fiesta, First we lift the car and remove the wheel, now we remove the front bolts so as to unlock the brake caliper and the hook, to continue we remove the bolts that hold the brake caliper tightly closed so as to unlock the pads and be able to pull them out, Now we push the pistons all inwards with the help of a screwdriver, after which we can insert the pads (check carefully that we have entered correctly and that they are well stuck) . Now we can mount the caliper in the disc by simply screwing the bolts removed previously. Repeat the same thing on the other side as well.


Posted on 28 November 2023 by ScegliAuto



Replacing the front brake pads on Ford Fiesta (2008-2016)
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Today we will see how to remove and replace the front brake pads on a Ford Fiesta (2008-2016). First we lift the car, even only on the front side, an
How do you replace the brake pads on the Ford Fiesta?
Ford Fiesta (2017-2023 / MK VII, Fiesta 7, MK 7) To be able to replace the brake pads of the Ford Fiesta, proceed with the same procedure for both the front and rear wheels: it will therefore be nec
How to replace front brake pads on Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) In this video tutorial, let's see how to replace the front brake pads of a sixth generation Ford Fiesta, produced from 2008 to 2017. The operation is

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos