Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to replace the front brake discs in Ford Fiesta?

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Brake discs
Operation: How to replace the front brake discs in Ford Fiesta?

In this tutorial we can see how to replace the front brake discs in the Ford Fiesta, a simple operation that requires good manual skills. We start by opening the bonnet and unscrewing the brake fluid reservoir cap, then we lift the front side of the vehicle and remove the wheel on the side we're going to work on. We then unscrew the lower bolt of the caliper with a 12mm spanner, lift the caliper itself upwards and remove the pads. We continue by unscrewing the additional bolts indicated, grab the disc and separate it from the hub. At this point we can insert the spare part and follow the reverse procedure to reassemble everything.


Posted on 26 November 2022 by ScegliAuto



How do you replace the front brake discs of the Ford Fiesta?
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) In order to replace the front brake discs of the Ford Fiesta, you need to lift the car so that it is not in contact with the ground: once the vehicle
How to replace the front brake disc on a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Before we begin, we will have to go and lift the front side of our Ford Fiesta. So let's start by disassembling the rear wheel, unscrewing the relati
Replacing the front brake pads on Ford Fiesta (2008-2016)
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Today we will see how to remove and replace the front brake pads on a Ford Fiesta (2008-2016). First we lift the car, even only on the front side, an

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos