|
Do it yourself
| |||
| ||||
How to replace the front discs of the Ford Fiesta V
Model: Ford Fiesta
Fiesta 5, MK 5, MK V
- Years 2002-2008
In this video, we will see how to change the front brake discs of the Ford Fiesta V: first, we open the brake fluid container, then we lift the front part of the car, placing it on jack stands, then remove the front wheels to access the discs better. Using a flathead screwdriver, we lift the support spring of the brake pads and remove it, then turn the disc outward: insert a flathead screwdriver into the caliper slot to push it out, and then, using a small one, remove the screw cap of the caliper bolt. Using a 7mm hex key, remove the two caliper bolts and remove the caliper, which we will tie to one of the suspension springs coils to avoid damaging the brake hose. Remove the brake pads, and then use a 13mm socket wrench to loosen the caliper support bolts. Now we can remove the disc, and then clean the hub with a wire brush, and then grease it with copper grease. The new disc must be cleaned with brake cleaner before installation: even the support bolts must be lubricated with copper grease, then we can reassemble the caliper and pads, one of which must be mounted externally and one on the piston that we will reassemble by disconnecting it from where we left it. Screw the caliper bolts back in, then reassemble the support spring. Repeat the operation on the other side, after which we can reassemble the wheels and lower the car. Operation completed.
Posted on 22 July 2024 by ScegliAuto
Video tutorial
Related tutorials
Ford Fiesta
(2008-2017 /
Fiesta 6, MK 6, MK VI)
To replace the front brake discs on a Ford Fiesta, lift the car so that it is not in contact with the ground. Once the vehicle is raised, loosen the …
Ford Fiesta
(2008-2017 /
Fiesta 6, MK 6, MK VI)
In this tutorial, you will see how to replace the front brake discs on a Ford Fiesta, a simple operation but one that requires good manual skills. St…
Ford Fiesta
(2002-2008 /
Fiesta 5, MK 5, MK V)
To replace the clutch on a Ford Fiesta 1.4 TDCi, lift the car using a ramp so that you can remove the bolts securing the left front wheel. Next, disc…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.835
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |