Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front brake pads on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Brake pads

In this video tutorial, learn how to replace the front brake pads on a sixth-generation Ford Fiesta, produced from 2008 to 2017. The operation is straightforward and can be done independently with a few tools. First, lift the car and remove the front wheel. Insert a flat screwdriver into the upper outer hole and lever it towards you to retract the brake piston. Then, use a 12mm spanner to undo the lower caliper bolt. Once done, open the caliper and replace the old pads. To reassemble, follow the procedure in reverse.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front brake pads of the Ford Fiesta
How to replace the front brake pads of the Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Today we will see the process of how to disassemble and replace the front brake pads of the Ford Fiesta. First, we lift the car and remove the front …
How to replace the front brake pads of the Ford Fiesta
How to replace the front brake pads of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today we will see the instructions that will show us how to disassemble and replace the front brake pads of the Ford Fiesta. First, lift the vehicle …
Replace the Front Brake Pads on a Ford Fiesta (2008-2016)
Replace the Front Brake Pads on a Ford Fiesta (2008-2016)
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today, you will learn how to remove and replace the front brake pads on a Ford Fiesta (2008-2016). First, lift the vehicle, even if just the front en…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos