Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Injectors on a Ford Fiesta?

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Fuel injectors

See other generations:
Video tutorial

The operation to replace the injectors on a Ford Fiesta involves opening the bonnet and removing the plastic cover from the top of the engine. Once removed, you will have access to the components located beneath it, allowing you to unscrew the bolts that secure the injectors in their housing.

After disconnecting the connectors, you can then pull out the old injectors from their housing to insert the new ones. These must be connected and secured, covering everything with the corresponding cover.


Updated on 26 June 2026 by ScegliAuto


Related tutorials

How to Replace the Injectors on a Ford Fiesta 1.6 TDCi
How to Replace the Injectors on a Ford Fiesta 1.6 TDCi
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) To replace the injectors on a Ford Fiesta 1.6 TDCi, open the bonnet to access the components at the top of the engine block after removing the plasti…
How to Replace the Injectors on the Ford Fiesta 1.4 TDCi?
How to Replace the Injectors on the Ford Fiesta 1.4 TDCi?
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) To replace the injectors on the Ford Fiesta, open the bonnet and detach the plastic cover from the top of the engine. This will allow access to the u…
Removing the Injectors and Copper Washers from the Ford Fiesta 1.4 TDCi
Removing the Injectors and Copper Washers from the Ford Fiesta 1.4 TDCi
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In today's video tutorial, see the main steps to remove the diesel injectors and their copper washers (which often cause leaks) from the Ford Fiesta …

    Frequently Asked Questions

    • Fiesta 2008-2017 - What is the tightening torque of the Ford Fiesta 1.4 TDCi injectors? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos