Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Ford Ka

Model: Ford Ka MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

To replace the front headlamp on a Ford Ka, open the bonnet to access the screws that secure the headlamp in its housing. Once these screws are loosened, you can pull the headlamp out of its position, disconnecting the connector at the rear.

At this point, remove the internal protective cover of the headlamp, pull out the bulb located beneath it, and replace it with a new one. After replacing, reinsert the headlamp into its housing, securing it with the appropriate screws.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb in the Ford Ka?
How to Replace the Front Headlamp Bulb in the Ford Ka?
Ford Ka (1996-2008 / MK 1) To replace the front headlamp bulb in the Ford Ka, open the bonnet to access the rear of the headlamp containing the bulb to be replaced. Remove the …
How to Replace the Front Headlamp Bulb on a Ford Ka?
How to Replace the Front Headlamp Bulb on a Ford Ka?
Ford Ka (1996-2008 / MK 1) To replace the headlamp bulb on a Ford Ka, open the bonnet to access the components in the engine bay. Locate the corresponding front headlamp and de…
Replacing Front Headlamp Bulbs on Ford Ka
Replacing Front Headlamp Bulbs on Ford Ka
Ford Ka (2008-2016 / MK 2) Replace the front headlamp bulb on a Ford Ka. Lift the bonnet and secure it. Remove the securing screws on either side of the headlamp, then remove t…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos