Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove and replace the Sync radio in the Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Car stereo

Today, you will see the necessary instructions on how to remove and replace the Sync multimedia system in the Ford Focus by following these simple steps. First, get inside the vehicle and start by removing the central plastic cover using thin levers; then unscrew the fixing screws of the multimedia system found on the sides, to remove the system and the central display (disconnecting the electrical connectors at the back), as shown in the video. Now install the new Sync 3 multimedia system, following the video tutorial to the end!

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Sync 3 Radio on Ford Focus MK3
Ford Focus (2011-2018 / MK 3) In today's video, you will see how to remove the Sync 3 radio from a Ford Focus MK3, following the instructions below. First, get inside the vehicle …
Removing the Dashboard Radio from a Ford Focus
Removing the Dashboard Radio from a Ford Focus
Ford Focus (1998-2004 / MK 1) Learn how to replace the radio in a Ford Focus. To replace the car radio, use the removal keys that come with the radio. Insert the keys into the sid…
Using SYNC 3 in a Ford Focus
Using SYNC 3 in a Ford Focus
Ford Focus (2018-2025 / MK 4) In this guide video, we will explore some important functions of our intuitive and really easy-to-use SYNC 3 system in the new Ford models, particula…

    Frequently Asked Questions

    • Focus 2018-2025 - Why does the Ford Focus screen not turn on? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos