Do it yourself
| ||||
|
Ford Puma - Video tutorial
Model: Ford Puma
MK 1
- Years 2019-2024 In this new guide of ours dedicated to all of you owners of the new Ford Puma (year 2019-2022) we will find out how to correctly replace the battery contained inside the smart key. First you have to disassemble the back cover with your own hands and then remove the physical emergency key located immediately below. At this point, get yourself a common flat screwdriver and use it to remove the front cover as well. Finally, replace the old battery with the new one (model CR 2032). Put the cover back on and you're done.
Posted on 5 April 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.064
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |