Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Shift knob

To replace the gear knob on a Ford Fiesta, start by lowering the gear gaiter by pulling it down. Now take the gear knob and unscrew it by turning it counterclockwise. Once the old gear knob is removed, take the new gear knob, position it on the lever, and screw it on, ensuring the symbol on the knob (the gear shift pattern) aligns with the numbers 2 and 4 towards the handbrake lever. After screwing on the gear knob, raise the gaiter and fit it into the ring beneath the gear knob.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Gear Knob from a Ford Fiesta
How to Remove the Gear Knob from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before starting, sit in the driver's seat of your Ford Fiesta. Begin by gripping the gear knob with both hands. Next, unscrew it from the gear lever.…
How to Replace the Gear Knob on a Ford Fiesta
How to Replace the Gear Knob on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Want to replace the gear knob on your Ford Fiesta? Let's look at how to remove the knob from the gear stick. Grip the knob and rotate it to the left …
How to replace the gear knob on the Ford Fiesta?
How to replace the gear knob on the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the gear knob on the Ford Fiesta, grasp the old knob and rotate it counterclockwise. This will allow you to detach it completely from the …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos