Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cigarette Lighter Socket from the Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Cigarette lighter

In this brief and simple guide, you will find the steps to remove and replace the cigarette lighter socket with USB ports in the Ford Focus. First, get inside the vehicle and start pulling the cigarette lighter socket towards you; then disconnect the connector found underneath, as shown in the video. At this point, remove the gear knob and the cover at the base to allow the wiring for the new USB port to pass through; then secure it in place of the cigarette lighter socket, following the video tutorial to the end!

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Cigarette Lighter Fuse in a Ford Focus?
Where is the Cigarette Lighter Fuse in a Ford Focus?
Ford Focus (2011-2018 / MK 3) If the cigarette lighter in your Ford Focus has stopped working, first check the status of the respective fuse, whose location is indicated in this v…
Where are the Fuse Boxes Located on the Ford Focus MK III?
Where are the Fuse Boxes Located on the Ford Focus MK III?
Ford Focus (2011-2018 / MK 3) Let’s see where the fuse boxes are located on a Ford Focus MK3: in the cabin, the fuse panel is located behind the glove compartment. To access it, y…
Fuse Box Location and Diagram on the Ford Focus MK1
Fuse Box Location and Diagram on the Ford Focus MK1
Ford Focus (1998-2004 / MK 1) In this video, you will see the diagram and location of the fuse box on the Ford Focus MK1, produced from 1999 to 2007. The first fuse box is located…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos