Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Where is the fuse for the cigarette lighter socket located in the Ford Focus?

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Cigarette Lighter
Operation: Where is the fuse for the cigarette lighter socket located in the Ford Focus?

In case the cigarette lighter socket of our Ford Focus has stopped working, we can first check the status of the corresponding fuse, the location of which is indicated in this video. As shown, the fuse in question is located in the box inside the cabin, specifically below the glove compartment on the passenger side. It is the sixth fuse in the first column, when looking at the box from the front, and it is a 20A fuse. In the event of a faulty fuse, make sure to use a replacement with equivalent characteristics and operate with the vehicle turned off, so as not to cause any damage.


Posted on 29 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 2004-2011 - Why is the cigarette lighter of the Ford Focus not working? Read Answer
    • Focus 1998-2004 - How to remove the cigarette lighter from a Ford Focus? Read Answer
    • Focus 2011-2018 - Where is the Ford Focus cigarette lighter located? Read Answer
    • Focus 1998-2004 - How much does the cigarette lighter cost for the Ford Focus mk1? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos