Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on the 2011 Ford Focus?

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Shift knob

On the 2011 Ford Focus, the gear knob is screwed onto the lever, making it very easy to remove even for the less experienced. No tools are required for this task. To replace it, simply rotate it counterclockwise to unscrew. Once removed, the new knob must be screwed back on by turning it clockwise. If necessary, after unscrewing the old knob and before inserting the new one, you can also replace the gear gaiter, the chrome plastic that secures the edges, and carry out any other maintenance tasks deemed necessary.

Updated on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Knob of the Ford Focus
How to Replace the Gear Knob of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today we will see the steps to remove and replace the gear knob of the Ford Focus, following the instructions below. First, get inside the vehicle an…
How to Replace the Gear Knob on a Ford Focus
How to Replace the Gear Knob on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this brief video tutorial, learn how to replace the gear knob on a Ford Focus mk2 with a manual gearbox, produced from 2004 to 2011. The operation…
How to Replace the Gear Knob on a Ford Focus
How to Replace the Gear Knob on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) How to remove the damaged gear knob? Here’s how to remove it from above the operating shaft of the Ford Focus. Use a plastic lever to disconnect the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos