Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light in a Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Service warning light

In this tutorial, see how to reset the service light in a Ford Fiesta, an extremely simple and quick operation to perform only after completing all required scheduled maintenance tasks. First, enter the cabin, then insert the key and turn on the instrument cluster. Once done, press down both the accelerator and brake pedals and hold them in position for about 20 seconds, or for as long as necessary until the service interval is correctly reset. Finally, restart the vehicle.

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light in the Ford Fiesta?
How to reset the service light in the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this tutorial we can see how to reset the service in the Ford Fiesta, an extremely simple and quick operation, to be carried out only once all sch…
How to reset the service light on the Ford Fiesta?
How to reset the service light on the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this tutorial, we can see how to reset the service in the Ford Fiesta, an extremely simple and quick operation, to be carried out only after compl…
How to reset the service light on the Ford Fiesta?
How to reset the service light on the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this tutorial, we can see how to reset the service in the Ford Fiesta, an extremely simple and quick operation to be carried out only once all sch…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos