Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Axle Bushes on a Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Bushings

In this tutorial, you will see how to replace the rear axle bushes on a Ford Fiesta, a simple operation if you have good manual skills. To do this, you will need a puller like the one shown in the video, which can be easily found online. First, lift the rear of the vehicle, taking all necessary safety precautions, then remove both wheels and disconnect all brake system pipes. Next, support the axle, unscrew the relevant fixing bolts, and lower it enough to access the bushes. Once the bushes are removed, you can insert the replacements and follow the reverse procedure.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Shoes on a Ford Fiesta?
How to Replace the Rear Brake Shoes on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the rear brake shoes on a Ford Fiesta, lift the car using a jack or ramp, so that the corresponding wheel is not in contact with the groun…
Replacing the Rear Brake Shoes on the Ford Fiesta MK6
Replacing the Rear Brake Shoes on the Ford Fiesta MK6
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Today, we will go through the main steps to remove and replace the rear brake shoes on the sixth-generation Ford Fiesta. First, lift the vehicle at t…
Replacing the ABS Sensor on a Ford Fiesta
Replacing the ABS Sensor on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Replacing the ABS sensor on a Ford Fiesta? Let's see how to disassemble the part. Lift the car with a jack, unscrew the wheel bolts with a socket spa…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos