Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Passenger Door Panel on a Ford Transit Custom?

Model: Ford Transit MK 8 - Years 2014-2024
Part: Door trim panel

In this tutorial, you will see how to remove the door panel on a Ford Transit Custom, a very simple and quick operation. First, open the door in question. Then, using a plastic spatula to avoid leaving any marks, unclip the cover of the grab handle, the small flap inside the opening handle, and the plugs along the vertical edge. Once this is done, unscrew all the indicated fixing screws, grasp the panel, separate it from the door, and disconnect both the window lift connector and the lock cable.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the handle of the sliding door in the Ford Transit Custom van?
How to disassemble the handle of the sliding door in the Ford Transit Custom van?
Ford Transit (2014-2024 / MK 8) In this tutorial we can see how to remove the handle of the sliding door in the Ford Transit Custom van, an extremely simple and quick operation. Fir…
How to Replace the Rear Headlight Bulbs of the Ford Transit Custom
How to Replace the Rear Headlight Bulbs of the Ford Transit Custom
Ford Transit (2012-2024 / Custom) Today, we will discover the instructions to remove and replace the rear headlight bulbs of the Ford Transit Custom. First, open the rear doors and st…
Where is the fuse box of the Ford Transit Custom 2024 located?
Where is the fuse box of the Ford Transit Custom 2024 located?
Ford Transit (2012-2024 / Custom) In this new mini guide aimed at those of you who own a 2024 Ford Transit Custom, we will help you easily find the box containing all the vehicle's fu…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos