Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the external handle in the Ford Transit van?

Model: Ford Transit MK 8 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Handle

See other generations:
Video tutorial

In this tutorial we can see how to replace the external handle in the Ford Transit van, an extremely simple and quick operation. First of all, we open the door in which we will be working, then we locate the small plastic cap on the inner edge and remove it. We then loosen the bolt that has just been released using a Torx T25 key, extract the lock cylinder and, pushing it towards the back of the vehicle, separate the handle from the door.

At this point, all that remains is to position the replacement and reassemble everything following the reverse procedure.


Posted on 19 September 2025 by ScegliAuto


Related tutorials

How to Replace the External Handle on a Ford Transit Van?
How to Replace the External Handle on a Ford Transit Van?
Ford Transit (2014-2024 / MK 8) In this tutorial, we will see how to replace the external handle on a Ford Transit van, a very simple and quick operation. First, open the door you w…
How to Replace the Sliding Door Handle on a Ford Transit Van
Ford Transit (2014-2024 / MK 8) In this tutorial, we will see how to replace the sliding door handle on a Ford Transit van, a very simple and quick operation. First, open the door i…
How to disassemble the handle of the sliding door in the Ford Transit Custom van?
How to disassemble the handle of the sliding door in the Ford Transit Custom van?
Ford Transit (2014-2024 / MK 8) In this tutorial we can see how to remove the handle of the sliding door in the Ford Transit Custom van, an extremely simple and quick operation. Fir…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos