Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the handle of the sliding door in the Ford Transit Custom van?

Model: Ford Transit MK 8 - Years 2014-2024
Part: Handle

In this tutorial we can see how to remove the handle of the sliding door in the Ford Transit Custom van, an extremely simple and quick operation. First of all, we open the door itself, then we remove the plastic rivets indicated using a flat-tip screwdriver. We then separate the panel from the door, remove the plastic cover, and loosen the bolt accessible from the hole just freed. At this point, we can extract the lock cylinder, remove the handle, and install any replacement parts following the reverse procedure.

Posted on 18 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Sliding Door on a Ford Transit Custom Van?
How to Dismantle the Sliding Door on a Ford Transit Custom Van?
Ford Transit (2014-2024 / MK 8) In this tutorial, see how to dismantle and replace the side sliding door on the Ford Transit Custom van, a very simple and quick operation, preferabl…
How to Replace the Sliding Door Handle on a Ford Transit Van
Ford Transit (2014-2024 / MK 8) In this tutorial, we will see how to replace the sliding door handle on a Ford Transit van, a very simple and quick operation. First, open the door i…
How to disassemble the front grille on the Ford Transit Custom van?
How to disassemble the front grille on the Ford Transit Custom van?
Ford Transit (2012-2024 / Custom) In this tutorial we can see how to disassemble the front grille in the Ford Transit Custom van, an extremely simple and quick operation. First of all…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos