Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Transit
    4. : How to replace the handle of the sliding door in the Ford Transit van?

Ford Transit - Video tutorial

Model: Ford Transit MK 8 - Years 2014-2023
Part: Handle
Operation: How to replace the handle of the sliding door in the Ford Transit van?

In this tutorial, we can see how to replace the handle of the sliding door in the Ford Transit van, an extremely simple and quick operation. First of all, we open the door itself, then we locate the small hole located on the back of the handle and, using a Torx T25 key, we loosen the screw accessible from the inside. We then move to the outside, remove the lock cylinder, grip the handle, and separate it from the door by pulling it towards the back. To install the replacement, simply follow the exact reverse procedure.


Posted on 22 July 2023 by ScegliAuto



How to disassemble the sliding door in the Ford Transit Custom van?
Ford Transit (2014-2023 / MK 8) In this tutorial we can see how to disassemble and replace the sliding side door in the Ford Transit Custom van, a very simple and fast operation, po
How to disassemble the passenger door panel on the Ford Transit Custom van?
Ford Transit (2014-2023 / MK 8) In this tutorial, we can see how to disassemble the door panel in the Ford Transit Custom van, a very simple and fast operation. First of all, we ope
How to remove the tailgate panel in Ford Transit van?
Ford Transit (2014-2023 / MK 8) In this video we can see how to remove the tailgate panel in the Ford Transit van. First we remove the upper frame part by disengaging the internal c

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos