Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a New Car Radio in a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Car stereo

Installing a new car radio in a Ford Fiesta is straightforward. After purchasing the radio kit, proceed by connecting all the new connectors to the area where the radio will be installed. Next, remove the old radio by inserting plastic levers into the central console and removing the entire section as shown in the video. Remove the display by unscrewing the two side screws, then take out the CD player and the radio itself by disconnecting the connectors. To install the new radio, first connect the display connectors, then secure the screws and close the upper console. Finally, install the remaining parts by connecting the other connectors and assembling the lower console.

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Radio Fuse in a Ford Fiesta
How to Replace the Radio Fuse in a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you can start, sit in the front passenger seat of your Ford Fiesta. First, open the front glove compartment. Next, unclip and remove the glove…
How to Remove the Original Radio from a Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Is the radio in your Fiesta due for replacement? Here’s how to remove and replace it from the dashboard. First, you need to remove the plastic trim a…
Removing the Radio from a Ford Fiesta
Removing the Radio from a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Is the radio in your Ford Fiesta damaged? Here’s how to remove it. Remove the stereo trim with a plastic lever (where the radio controls are) from th…

    Frequently Asked Questions

    • Fiesta 2008-2017 - What to do when the Ford Fiesta radio doesn't work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos