Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Tire pressure warning light

To reset the tyre pressure light on a Ford Fiesta, press and hold the brake pedal while the instrument cluster is off. When the pedal is pressed, turn on the instrument cluster and then release the pedal. After a few seconds, press the pedal again, this time with the cluster on. Now, turn the key to switch the cluster on and off several times in quick succession. You will notice that the tyre pressure light will start to flash and will turn off if the tyres have been inflated to the correct pressure.

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on a Ford Fiesta?
How to reset the tyre pressure warning light on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To reset the tyre pressure warning light on a Ford Fiesta, first inflate the tyres to the correct pressure indicated on the sticker located on the dr…
How do you reset the tire pressure light on the Ford Fiesta?
How do you reset the tire pressure light on the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) On the instrument panel of the Ford Fiesta, the tire pressure warning light that appears can be reset by first inflating the tires, bringing them to …
How to Reset the Tyre Pressure Light on a 2015 Ford Fiesta
How to Reset the Tyre Pressure Light on a 2015 Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) You can reset the tyre pressure light on a 2015 Ford Fiesta using the radio display and the buttons below it. Start by pressing the "menu" button loc…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos