Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headliner on a Ford Explorer?

Model: Ford Explorer MK 5, U502 - Years 2011-2019
Part: Checks and maintenance

In this tutorial, see how to replace the headliner on a Ford Explorer, an extremely simple and quick operation. First, go inside the cabin, then extend the sun visors, unclip the covers of their respective bases, and unscrew the fixing screws. Next, remove the front interior light, unclip the covers of both pillars, and proceed with the two side pillars. Finally, remove the grab handles, pull the headliner down, and separate it from the roof. At this point, you can reupholster the entire element or directly fit a replacement.

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Fuse Box of a Ford Explorer
Ford Explorer (2006-2010 / U251, MK 4) This useful video shows the location of the two fuse boxes in our Ford Explorer, Sport Trac model, produced from 2006 to 2010. As seen in the tutoria…
Where is the OBD port located on the Ford Explorer 2008?
Ford Explorer (2006-2010 / U251, MK 4) In the following guide, we will describe all the steps you need to follow if you need to locate the OBD port in the cabin of your 2008 Ford Explorer.…
Where to Find the Fuse Box on the 2010 Ford Explorer
Where to Find the Fuse Box on the 2010 Ford Explorer
Ford Explorer (2006-2010 / U251, MK 4) If your 2010 Ford Explorer has a fault in one or more electrical components and you want to access the respective fuses directly, simply follow this …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos