Where is the OBD port located on the Ford Explorer 2008?

Model: Ford Explorer MK 4, U251 - Years: 2006, 2007, 2008, 2009, 2010
Part: Dashboard

See other generations:

This video is currently unavailable

In the following guide, we will describe all the steps you need to follow if you need to locate the OBD port in the cabin of your 2008 Ford Explorer. First of all, you need to open the driver's side door, make sure the vehicle is turned off, and then proceed to locate the OBD port on the lower left side of the dashboard.

Once you have found it, you can safely connect a diagnostic tool to it to identify any errors in the control unit, as long as it is fully compatible with the model of Ford Explorer you own.

Posted on 16 May 2025 by ScegliAuto

Other guides you may be interested in

Control Unit - Maintenance and repair on other vehicles

Dashboard - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!

by ScegliAuto

Where is the OBD port located on the Ford Explorer 2008?

Related tutorials

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

More videos