Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuse Box on the 2010 Ford Explorer

Model: Ford Explorer U251, MK 4 - Years 2006-2010
Part: Fuse box

If your 2010 Ford Explorer has a fault in one or more electrical components and you want to access the respective fuses directly, simply follow this guide to locate them quickly. First, turn off your Ford Explorer and locate the small compartment at the lower part of the dashboard, to the left of the steering wheel. Remove the cover of this compartment by hand, and you will finally have access to the fuses you were looking for. Disconnect the battery terminals before working on them.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the cabin of the 2006 Ford Explorer?
Ford Explorer (2006-2010 / U251, MK 4) If you haven't been able to find the fuse box for your 2006 Ford Explorer yet, don't worry because in the following guide you will find all the instr…
Where to Find the Fuse Box on the Ford Explorer 5
Where to Find the Fuse Box on the Ford Explorer 5
Ford Explorer (2011-2019 / MK 5, U502) If you do not know where the fuse box containing all the various fuses of your Ford Explorer fifth generation (2011-2019) is located, do not worry be…
Where Are the Fuses in the Ford Explorer?
Where Are the Fuses in the Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) The fuses in the Ford Explorer are located inside the designated fuse boxes within the vehicle: this model has two. The first is found inside the cab…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos