Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on a Ford Explorer [WORLD]

Model: Ford Explorer MK 4, U251 - Years: 2006, 2007, 2008, 2009, 2010
Part: Battery

See other generations:
Video tutorial

To replace the battery independently on this vehicle, the following description contains all the necessary information and steps for a safe replacement. The battery is located on the left side of the engine bay. First, disconnect the negative terminal, followed by the positive terminal.

Remove the lower plate by unscrewing the fixing screws. Then, extract the battery from its housing and replace it with the new one. Reconnect the positive terminal first, then the negative terminal, and finally refit the support plate.


Updated on 29 July 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Ford Explorer
How to Replace the Battery in a Ford Explorer
Ford Explorer (2002-2005 / MK 3, U152) To replace the battery in a Ford Explorer, open the bonnet and access the engine bay, as the battery is located on the right side. Disconnect the app…
How to replace the battery of the Ford Explorer remote control
How to replace the battery of the Ford Explorer remote control
Ford Explorer (2020-2026 / MK 6, U625) Today we will explain how to replace the battery of a Ford Explorer remote control. To replace the battery, we need to remove the emergency key conta…
How to Replace the Battery on a Ford Explorer?
How to Replace the Battery on a Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) To replace the battery on a Ford Explorer, open the bonnet to access the engine bay and locate the battery on the right side. Disconnect the cables a…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos