Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Ford Explorer remote control

Model: Ford Explorer U625, MK 6 - Years 2020-2026
Part: Key

Today we will explain how to replace the battery of a Ford Explorer remote control. To replace the battery, we need to remove the emergency key contained inside the remote control. Press on the sides of the remote control to remove the bottom part. After removing the metal key, open the remote control in two parts to replace the battery. The battery we will use for the replacement is a CR 2450 3 Volt battery. After inserting the remote control battery, close the two parts and insert the metal key inside. Complete the procedure by testing the functioning of the remote control.

Posted on 14 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Ford Explorer remote control
How to replace the battery of the Ford Explorer remote control
Ford Explorer (2011-2019 / MK 5, U502) In a simple and brief way, we will discover how to disassemble and replace the battery of the key remote for the Ford Explorer. First, take your remo…
How to replace the battery of the 2017 Ford Explorer remote control
How to replace the battery of the 2017 Ford Explorer remote control
Ford Explorer (2011-2019 / MK 5, U502) Today we will explain how to replace the battery of the 2017 Ford Explorer remote control. To replace the battery, we need to press the side button t…
How to replace the battery of the Ford Explorer remote control
How to replace the battery of the Ford Explorer remote control
Ford Explorer (2011-2019 / MK 5, U502) The Ford Explorer model produced from 2017 to 2025 features an easy-to-use remote control. In case the remote control stops working, the cause is usu…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos