Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Legal Chassis Number (VIN) of the Ford Transit MK8

Model: Ford Transit MK 8 - Years 2014-2024
Part: Checks and maintenance

Knowing where to reliably find the chassis number of a commercial vehicle is very important, as if stopped by the Police or Customs, searching for the chassis number through trial and error may lead them to suspect that the vehicle could be stolen, especially if it is not registered in your name. Unfortunately, manufacturers do not always assist us, as sometimes the legal chassis number is not readily accessible. This is the case with the Ford Transit MK8, where you need to look for the chassis number in the front left wheel arch (viewing the vehicle from the front), on the passenger side, just behind the wheel.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery on a Ford Transit MK8
How to replace the battery on a Ford Transit MK8
Ford Transit (2014-2024 / MK 8) In this video, you will see how to replace the battery on a Ford Transit MK8: in this vehicle, the battery is located under the driver's seat rather …
How to Reset the Service Lights on a Ford Transit MK8
How to Reset the Service Lights on a Ford Transit MK8
Ford Transit (2014-2024 / MK 8) In this video, we will see how to reset the maintenance lights on a Ford Transit MK8: you need to use the buttons located on the right side of the st…
How to reset the service light on a Ford Transit MK8
How to reset the service light on a Ford Transit MK8
Ford Transit (2014-2024 / MK 8) In this video, see how to reset the service light on a Ford Transit MK8. First, turn on the ignition by simply turning the key to the on position, wi…

    Frequently Asked Questions

    • Transit 2014-2024 - How do you access the secret menu of the Ford Transit Custom? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos