Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Adjusting the Handbrake on the Ford Fiesta

Model: Ford Fiesta MK V, MK 5, Fiesta 5 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Parking brake

See other generations:
Video tutorial

If pulling the handbrake lever on the Ford Fiesta does not provide sufficient braking even when fully pulled, you can adjust its setting. Sit in the driver's seat and use a flathead screwdriver to detach the protective cover at the base of the handbrake lever, pulling it upwards to expose the base of the lever.

Next to it, you will notice an adjustment consisting of a threaded rod and a nut. By turning this nut with a spanner, you can increase the force. Refit the cover, then test to verify the effectiveness of the adjustment.


Updated on 13 September 2026 by ScegliAuto


Related tutorials

How to Adjust the Handbrake Cable on the Ford Fiesta
How to Adjust the Handbrake Cable on the Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) These brief and simple steps will show you how to adjust the handbrake on the Ford Fiesta. First, get into the vehicle and start by removing the plas…
Simple Handbrake Adjustment on the Ford Fiesta MKVII
Simple Handbrake Adjustment on the Ford Fiesta MKVII
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) .. Adjusting the handbrake on the Ford Fiesta Mk VII is done by acting on the central tensioner, accessible.. …
How to Adjust the Handbrake on a Ford Fiesta Mk7
How to Adjust the Handbrake on a Ford Fiesta Mk7
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Start by removing the gear lever from its housing. To do this, unscrew the knob and then remove the plastic cover. Next, remove the lower dashboard t…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos