Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on the Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure warning light on the Ford Fiesta, first inflate the tyres to the recommended pressure value, indicated on the sticker attached to the driver's door pillar. Then, press the brake pedal and turn the ignition on by turning the key three times.

After this, press the brake pedal again and repeat the operation with the key; the warning light will start flashing until it turns off completely.


Updated on 14 September 2026 by ScegliAuto


Related tutorials

How to reset the tire pressure light on the Ford Fiesta
How to reset the tire pressure light on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Today's main instructions will allow us to reset the tire pressure warning light on the Ford Fiesta; before resetting the TPMS sensors, all four tire…
How to reset the tyre pressure warning light on a Ford Fiesta?
How to reset the tyre pressure warning light on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) To reset the tyre pressure warning light on a Ford Fiesta, first inflate the tyres to the correct pressure indicated on the sticker located on the dr…
How do you reset the tire pressure light on the Ford Fiesta?
How do you reset the tire pressure light on the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) The tire pressure sensor of the Ford Fiesta can be reset by first inflating the tires, bringing them back to the recommended pressure value: this val…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos