Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Headlights on a Ford Fusion?

Model: Ford Fusion North America MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Headlight

See other generations:
Video tutorial

In this tutorial, you will see how to adjust the headlights on a Ford Fusion, a very simple and quick operation. First, position the vehicle in front of a white wall, a few feet away.

Then, turn on the low beam headlights and open the hood. Next, locate the adjustment screws on the back of both headlight assemblies.

Use a standard Phillips screwdriver to turn them and position both light beams at about 39 inches high. Finally, drive a few miles on the road to test the new adjustment.


Updated on 16 September 2026 by ScegliAuto


Related tutorials

How to adjust the height of the front headlights of the Ford Fusion
How to adjust the height of the front headlights of the Ford Fusion
Ford Fusion North America (2006-2012 / MK 1) In this guide we will see the instructions that will allow us to adjust the height of the front headlights of the Ford Fusion, in simple and quick st…
How to Adjust the Instrument Cluster Brightness in a Ford Fusion?
How to Adjust the Instrument Cluster Brightness in a Ford Fusion?
Ford Fusion North America (2013-2020 / MK 2) In this tutorial, you will see how to adjust the instrument cluster brightness in a Ford Fusion, a very simple and quick operation. First, insert the…
How to Remove the Rear Bumper from a Ford Fusion North America?
How to Remove the Rear Bumper from a Ford Fusion North America?
Ford Fusion North America (2006-2012 / MK 1) To remove the rear bumper from the Ford Fusion, open the trunk to detach the seal around the trunk opening. Once the seal is removed, detach the blac…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos