Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper from a Ford Fusion North America?

Model: Ford Fusion North America MK 1 - Years 2006-2012
Part: Rear bumper

To remove the rear bumper from the Ford Fusion, open the trunk to detach the seal around the trunk opening. Once the seal is removed, detach the black plastic cover by unscrewing the screws underneath that secure the taillights. After the two taillights are disconnected and completely removed, unscrew their underlying screws, along with those located inside the rear wheel wells. Then, you can completely detach the bumper to install a new one.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Bumper of the Ford Fusion North America
How to Replace the Front Bumper of the Ford Fusion North America
Ford Fusion North America (2013-2020 / MK 2) Today, in this video tutorial, you will see the instructions that will allow you to remove and replace the front bumper of the Ford Fusion North Amer…
How to Replace the Rear Headlight on the Ford Fusion North America
How to Replace the Rear Headlight on the Ford Fusion North America
Ford Fusion North America (2013-2020 / MK 2) In this guide, you will see how to remove and replace the rear headlight on the Ford Fusion North America in simple and quick steps. First, open the …
How to Replace the Outside Mirror on the Ford Fusion North America?
How to Replace the Outside Mirror on the Ford Fusion North America?
Ford Fusion North America (2013-2020 / MK 2) To replace the outside mirror on the Ford Fusion North America, you need to remove the cover of the window switch panel to access the underlying scre…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos