Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change a Tire on a Ford Fusion?

Model: Ford Fusion North America MK 2 - Years 2013-2020
Part: Wheel

In this tutorial, see how to change a tire on a Ford Fusion, a very simple operation. First, ensure the parking brake is properly engaged, then open the trunk and retrieve both the spare tire and the various tools. Next, loosen the lug nuts of the tire to be replaced, position the jack under the indicated frame area, and lift the car. At this point, you can completely remove the old tire, place the replacement on, and tighten the lug nuts. These should only be tightened once the car is back on the ground.

Updated on 17 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Rear Shock Absorber on a Ford Fusion?
How to Replace the Rear Shock Absorber on a Ford Fusion?
Ford Fusion North America (2006-2012 / MK 1) To replace the rear shock absorber on a Ford Fusion, lift the vehicle with a jack or lift so that the corresponding wheel is not in contact with the …
How to Manually Change the Time on a Ford Fusion
How to Manually Change the Time on a Ford Fusion
Ford Fusion North America (2006-2012 / MK 1) Changing the time displayed on the radio of your Ford Fusion is very simple. Just follow this procedure to complete the task in seconds. First, get i…
Where is the fuse box of the Ford Fusion located?
Where is the fuse box of the Ford Fusion located?
Ford Fusion North America (2006-2012 / MK 1) If you don't know where the fuse box is located inside the cabin of your first-generation Ford Fusion, don't worry because with the following guide y…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos