Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Front Bumper on a Ford Fusion

Model: Ford Fusion North America MK 2 - Years 2013-2020
Part: Front bumper

Today, you will see the main steps to remove and replace the front bumper on a Ford Fusion. First, open the hood of your car and start unscrewing all the screws located at the top of the bumper, as well as those on the plastic shield, using a Torx screwdriver. Next, remove the various plastic clips, as shown in the video. At this point, remove the additional clips from both sides of the front wheel wells, releasing the bumper from the sides. Finally, remove the bumper completely by following the video tutorial to the end!

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Bumper of the Ford Fusion North America
How to Replace the Front Bumper of the Ford Fusion North America
Ford Fusion North America (2013-2020 / MK 2) Today, in this video tutorial, you will see the instructions that will allow you to remove and replace the front bumper of the Ford Fusion North Amer…
Disassembly and replacement of the horn of the Ford Fusion.
Disassembly and replacement of the horn of the Ford Fusion.
Ford Fusion North America (2013-2020 / MK 2) In this short guide, we will see the main instructions on how to disassemble and replace the horn or the acoustic warning device of the Ford Fusion. …
How to Remove the Rear Bumper from a Ford Fusion North America?
How to Remove the Rear Bumper from a Ford Fusion North America?
Ford Fusion North America (2006-2012 / MK 1) To remove the rear bumper from the Ford Fusion, open the trunk to detach the seal around the trunk opening. Once the seal is removed, detach the blac…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos