Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Speaker

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Speaker

See other generations:
Video tutorial

Using a plastic lever, remove the triangular panel where the mirror control is located and disconnect the connector. Next, undo the bolt found behind the cap behind the door handle.

Again, using the plastic lever, remove the armrest panel to access the two screws located behind it. Now you can start undoing the bolts around the door panel. Use the plastic lever to also remove the panel where the handle is located and disconnect the connectors present.

Finally, pull off the entire panel. Undo the screws securing the speaker and disconnect its connector.

Follow the steps in reverse to reassemble everything.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Front Door Speaker of the Ford Focus
Guide to Replacing the Front Door Speaker of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this guide, follow the instructions to remove and replace the front door speaker of the Ford Focus. First, open the front door of the vehicle and …
How to Remove the Speaker Housing from a Ford Focus Door
How to Remove the Speaker Housing from a Ford Focus Door
Ford Focus (2004-2011 / MK 2, Focus 2) Is the speaker mounted in the door damaged? Let's remove it from a Ford Focus. Use a screwdriver to unscrew the retaining screws located in the plast…
How to replace the front speaker of the Ford Focus
How to replace the front speaker of the Ford Focus
Ford Focus (2011-2018 / MK 3) In this guide, we will see the step-by-step instructions that will allow us to disassemble and replace the front door speaker of the Ford Focus. Firs…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos