Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Filter on the Ford Transit TDCi

Model: Ford Transit MK 7 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Air filter

See other generations:
Video tutorial

In this guide, follow the instructions to remove and replace the engine air filter on the Ford Transit TDCi. First, open the bonnet of the vehicle and disconnect the intake hose from the air filter box. Next, remove the upper cover to access the filter, allowing you to take it out as shown in the video.

Now, install the new air filter in the correct orientation; finally, refit the cover and reconnect the intake hose to complete the job!


Updated on 21 September 2026 by ScegliAuto


Related tutorials

Replacement of the diesel filter of the Ford Transit 2.2 TDCi
Replacement of the diesel filter of the Ford Transit 2.2 TDCi
Ford Transit (2014-2024 / MK 8) Today we will discover the steps that will allow us to disassemble and replace the diesel fuel filter cartridge of the Ford Transit 2.2 TDCi. First o…
How to replace the diesel filter of the Ford Transit 2.2 TDCi
How to replace the diesel filter of the Ford Transit 2.2 TDCi
Ford Transit (2014-2024 / MK 8) The instructions in this guide will show us how to disassemble and replace the diesel fuel filter of the Ford Transit 2.2 TDCi. First, lift the vehic…
How to Replace the Timing Chain on the Ford Transit 2.2 TDCi
How to Replace the Timing Chain on the Ford Transit 2.2 TDCi
Ford Transit (2006-2014 / MK 7) Below we will discover the useful information for disassembling and replacing the timing chain on the Ford Transit 2.2 TDCi. To access the timing cha…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos