Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the "AdBlue" alarm on Ford Ranger

Model: Ford Ranger T6, P375, PX - Years 2011-2023
Part: AdBlue warning light

The AdBlue warning usually activates when the AdBlue level in the tank is low or if there is a problem with the exhaust gas treatment system. Here are some steps you can follow. Check the AdBlue level in the tank and refill if necessary. The AdBlue tank is usually located next to the fuel tank and is easily identifiable by the blue cap. If you have already refilled the tank and the warning persists, it may be necessary to reset the light. Some vehicles may require a manual reset procedure. In some cases, shaking the AdBlue tank (where you filled the additive) a certain number of times with force can help reset the light. If the problem persists, there may be a fault in the AdBlue system that requires the attention of a qualified technician. A computerized diagnosis may be necessary to identify the problem. Remember that AdBlue is a crucial component for reducing polluting emissions from diesel vehicles and its proper functioning is important for the environment and compliance with emission regulations.

Posted on 5 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Ford Ranger (2011-2023 / T6, P375, PX) In this guide we will see the main information on how to top up the AdBlue liquid and how to reset the warning light on the Ford Ranger. When the AdB…
Ford Ranger (2011-2023 / T6, P375, PX) In this short and simple guide, we will see how to deactivate the warning light for topping up the AdBlue liquid in the Ford Ranger. To perform the r…
Ford Ranger (2011-2023 / T6, P375, PX) In this video, we will see how to reset the AdBlue warning light on a Ford Ranger after correctly refuelling with AdBlue. The light did not reset its…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos