Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to replace Ford Fiesta left rearview mirror 6

Ford Fiesta - Video tutorial

Model: Ford Fiesta Be91, Fiesta 4, MK 4, MK IV - Years 1996-2002
Part: Outside rearview mirror
Operation: How to replace Ford Fiesta left rearview mirror 6

The replacement of the external rearview mirror is very simple to carry out on this series of the Ford Fiesta as it can be removed without having to remove the door panel; therefore, once the door has been opened, unhook the triangular-shaped plastic coating applied right in correspondence with the mirror and move it far enough away to disconnect the power supply socket of the adjustment system and remove it completely; you can now unscrew the screws that secure the mirror to the door pillar and complete the disassembly and then proceed backwards to install the new one.


Posted on 28 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Fiesta 2008-2017 - How to remove the rearview mirror of a Ford Fista VI? Read Answer
    • Fiesta 2008-2017 - How much does it cost to replace the exterior mirror on the Ford Fiesta? Read Answer
    • Fiesta 2008-2017 - How much does the Ford Fiesta VI exterior rear view mirror cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos