Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light on the Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Tire pressure warning light

To reset the tire pressure of the Ford Focus, we check the pressure to make sure it is as indicated by the manufacturer, we enter the car, turn on the instrument panel, enter the menu by pressing the left arrow on the left steering wheel spoke, go to the "réglage" option, press the "ok" button, then go to the "ass. Conducteur" option, press the "ok" button, go to the "serv. Pneus" option, hold down the "ok" button until the slider reaches the end and the tire pressure warning light turns off. Once the warning light is off, we can turn off the instrument panel, turn it back on and check if the warning light remains off.

Posted on 24 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on a Ford Focus?
How to Reset the Tyre Pressure Light on a Ford Focus?
Ford Focus (2018-2025 / MK 4) You can completely clear the tyre pressure light on a Ford Focus by inflating the tyres until they reach the optimal pressure value: this will be ind…
How to Reset the Tyre Pressure Warning Light on a Ford Focus mk3
How to Reset the Tyre Pressure Warning Light on a Ford Focus mk3
Ford Focus (2011-2018 / MK 3) This guide shows how to reset the tyre pressure warning light on a Ford Focus mk3. No tools or specialist knowledge are required for this operation. …
How to reset the tire pressure sensor on the Ford Focus
Ford Focus (2011-2018 / MK 3) Today we will discover the procedure that will allow us to reset the tire pressure warning light of the Ford Focus; before performing the reset, it i…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos