Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Damaged Bulbs on a Ford Focus

Model: Ford Focus MK 1 - Years 1998-2004
Part: Headlight bulb

Don't know how to replace the bulbs on your Focus? Let's see in this video how to replace the bulbs on the Ford Focus. Open the bonnet using the ignition key, inserting it into the lock of the front bonnet as shown in the video. Remove the top screw of the headlamp with a screwdriver and pull the headlamp out of its housing. Replace the worn bulbs with new ones (same size and voltage). Once everything is replaced, refit the headlamp into its housing with all the screws (remember to connect the terminals). Finally, test the correct operation of the lights by turning on the instrument panel.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulbs of a Ford Focus
How to Replace the Headlight Bulbs of a Ford Focus
Ford Focus (2011-2018 / MK 3) Let’s see how to replace the bulbs inside the front headlight of a Ford Focus. Lift the front bonnet by pulling the lever located at the bottom right…
Replace Headlamp Bulbs on Ford Focus
Replace Headlamp Bulbs on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Remove the front headlamp from the Ford Focus to replace the bulbs inside. Lift the bonnet that covers the engine and locate the securing screws for …
How to Replace the Front Headlight Bulbs of a Ford Focus
How to Replace the Front Headlight Bulbs of a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Let's see how to replace the front headlight bulbs of a Ford Focus. Open the bonnet by pulling the lever located at the bottom right of the dashboard…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos