Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the Ford Transit Custom

Model: Ford Transit MK 8 - Years 2014-2024
Part: Headlight bulb

The following procedure will show us how to disassemble and replace the headlight bulb of the Ford Transit. First, we open the vehicle's hood and start unscrewing the fixing screws of the front light unit, disconnecting the electrical connector of the lights to remove it; then we remove the plastic bulb protection cap and unhook the metal clip to remove it, as shown in the video. At this point, we replace and install the new dipped or main beam bulb, connecting the connector and finally fixing the light unit on the body!

Posted on 13 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulbs of the Ford Transit Custom
How to Replace the Rear Headlight Bulbs of the Ford Transit Custom
Ford Transit (2012-2024 / Custom) Today, we will discover the instructions to remove and replace the rear headlight bulbs of the Ford Transit Custom. First, open the rear doors and st…
Replacement of the front headlight bulb of the Ford Transit Custom
Replacement of the front headlight bulb of the Ford Transit Custom
Ford Transit (2012-2024 / Custom) Today we will discover information about disassembling and replacing the headlight bulb of the Ford Transit Custom. First, open the hood of the vehic…
How to Replace the Front Headlamp Bulb on the Ford Transit MK7
How to Replace the Front Headlamp Bulb on the Ford Transit MK7
Ford Transit (2006-2014 / MK 7) In today's video, you will see how to remove and replace the front headlamp bulb on the seventh generation Ford Transit in simple and quick steps. Fi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos