Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Garelli Vip
Part: Carburetor

In order to replace the carburetor of the Garelli VIP, you will need to locate this component on the top of the engine block, on the right side compared to the motorcycle frame: once the carburetor has been located, you will need to unscrew the screws that hold it in place and also disconnect the cables and tubes connected to it. In this way it will be possible to remove the old carburetor and insert the new one: this must be properly fixed in place with the screws, reconnecting it with tubes and connectors in order to verify that everything works correctly.

Posted on 13 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Seat of a Garelli Vip
How to Remove the Seat of a Garelli Vip
Vip Before you begin, position your Garelli Vip on the centre stand. The seat of this moped is secured to the frame with lower bolts. Start by unscrewing…
Restoration and Repainting of a Garelli Vip
Restoration and Repainting of a Garelli Vip
Vip Today, we will give you some tips for restoring a Garelli Vip. First, if the chrome parts are rusty, clean them with steel wool and a suitable polish…
How to Replace the Seat on the Garelli Vip?
How to Replace the Seat on the Garelli Vip?
Vip To replace the seat on the Garelli Vip, loosen the bolts securing the old seat to its housing: these bolts will be located directly underneath the se…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos