Do it yourself
Frequently asked questions about cars and motorcycles

Model: Gasgas Ec 250
Part:

Below are the main steps to remove and replace the flywheel on the Gasgas EC 250 enduro bike, as well as the EC 300. First, place the bike on a stand and begin unscrewing the screws securing the flywheel cover; then, remove the central nut using a socket wrench with an extension to detach it from the crankshaft. At this point, modify or replace the flywheel, ensuring it is perfectly balanced; secure it correctly and finally reattach the flywheel cover!

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Ec 250 The procedure for dismantling the engine of the GasGas EC 250 involves loosening all the bolts that secure it to the appropriate supports, allowing i…
Ec 250 To replace the starter motor on the GasGas EC 250, locate its housing on the left side of the bike, just above the clutch cover. The part can be remo…
Ec 250 Today, we will see the instructions that will allow us to replace the engine coolant on the Gasgas EC 250 enduro motorcycle. First, place the bike on…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos