Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do i replace the brake pads on the Genesis G70?

Model: Genesis G70 MK 1 - Years 2018-2025
Part: Brake pads

The replacement of the brake pads of the Genesis G70 is the same for both the rear and the front wheels. It will be necessary to go and lift the car, so that the wheels are not in contact with the floor: then you can remove the cover of the rear part of the caliper, so that you have access to the pads underneath. After removing the fixing pins, it will be possible to remove the pads from the inside of the caliper and insert the new ones inside. Finally it will be possible to position the corresponding wheel and fix it with the bolts.

Posted on 18 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front brake pads of the Genesis G70.
How to replace the front brake pads of the Genesis G70.
Genesis G70 (2018-2025 / MK 1) In today's video tutorial, we will see how to disassemble and replace the front brake pads of the Genesis G70, following the instructions below. Firs…
How to reset the oil light on the Genesis G70 2023
How to reset the oil light on the Genesis G70 2023
Genesis G70 (2018-2025 / MK 1) In the following guide, we will discover together how to quickly and safely perform a manual reset of the oil light on the dashboard of your 2023 Gen…
How to replace the front brake discs on the Genesis G70
How to replace the front brake discs on the Genesis G70
Genesis G70 (2018-2025 / MK 1) In this video tutorial we will see how to remove and replace the front brake discs and pads of the Genesis G70, in simple steps. First of all we lift…

Other guides you may be interested in

How to Remove the Instrument Cluster on a Citroen Xsara Picasso

How to remove the instrument cluster located in the centre of the dashboard on a Citroen Xsara Picasso? Follow these steps to disassemble the parts: use a lever to remove the plastic covers of the instrument cluster. Unscrew the securing screws located at the sides of the instrument cluster with a screwdriver; after removing the screws, pull the piece out from the dashboard and disconnect the power cable located at the back of the instrument cluster. Fit the new piece or (replace the LEDs/bulbs in the cluster) and reassemble the same. Finally, reverse the assembly steps.

Watch the video!


by ScegliAuto

More videos