Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Genesis G80?

Model: Genesis G80 MK 2, DH - Years 2016-2020
Part: Brake pads

To replace the front brake pads on a Genesis G80, lift the vehicle so that the corresponding wheels are off the ground. Once the vehicle is raised, loosen the bolts that secure the wheel to the hub, completely remove it, and access the brake caliper at the back. Here, loosen the bolts that secure the caliper to the brake rotor, detach it, and slide out the pads inside. This will allow you to insert the new pads, securing the caliper with the appropriate screws.

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Rear Brake Discs and Pads on the Genesis G80
Guide to Replacing the Rear Brake Discs and Pads on the Genesis G80
Genesis G80 (2016-2020 / MK 2, DH) This guide provides the main instructions on how to remove and replace the rear brake discs and pads on the Genesis G80. First, lift the vehicle and …
How to Replace the Battery in the Genesis G80
How to Replace the Battery in the Genesis G80
Genesis G80 (2016-2020 / MK 2, DH) In this guide, learn how to remove and replace the battery in the Genesis G80 in simple, quick steps. First, open the trunk and start removing the fl…
How to Replace the Front Bumper Grille of the Genesis G80
How to Replace the Front Bumper Grille of the Genesis G80
Genesis G80 (2016-2020 / MK 2, DH) In this guide, learn how to remove and replace the front bumper grille of the Genesis G80. First, open the hood of your car and start by removing the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos