Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Rear Brake Discs and Pads on the Genesis G80

Model: Genesis G80 MK 2, DH - Years 2016-2020
Part: Brake rotors

This guide provides the main instructions on how to remove and replace the rear brake discs and pads on the Genesis G80. First, lift the vehicle and remove the rear wheel; then, unscrew the bolts securing the brake caliper and remove it from the disc. Next, remove the caliper bracket and then unscrew the bolts of the brake disc using a socket wrench; remove the brake disc and install the new one of the correct type. Now, reattach the brake caliper and install the new brake pads accordingly!

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Genesis G80?
How to Replace the Front Brake Pads on a Genesis G80?
Genesis G80 (2016-2020 / MK 2, DH) To replace the front brake pads on a Genesis G80, lift the vehicle so that the corresponding wheels are off the ground. Once the vehicle is raised, l…
How to Replace the Battery in the Genesis G80
How to Replace the Battery in the Genesis G80
Genesis G80 (2016-2020 / MK 2, DH) In this guide, learn how to remove and replace the battery in the Genesis G80 in simple, quick steps. First, open the trunk and start removing the fl…
How to Replace the Thermostat on a Genesis G80?
How to Replace the Thermostat on a Genesis G80?
Genesis G80 (2020-2026 / MK 3, RG3) To replace the thermostat on a Genesis G80, open the hood to access the components in the engine compartment. On the left side, locate the coolant pa…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos