Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Genesis
    3. :
  3. G80
    4. : How to replace the front bumper grille of the Genesis G80.

Genesis G80 - Video tutorial

Model: Genesis G80 MK 2, DH - Years 2016-2020
Part: Grille
Operation: How to replace the front bumper grille of the Genesis G80.

Let's see in this guide how to remove and replace the front bumper grille of the Genesis G80. First, we open the hood of our car and start removing the plastic cover we find on the top of the front bumper, removing all the clips; then we unscrew the bumper screws we find at the bottom, removing the lower engine protection, as shown in the video. At this point, we remove the entire front bumper, then remove our grille; replace it with the new one, applying the reverse process for reassembly!


Posted on 24 May 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos