Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Headlight Bulb of the Genesis G80

Model: Genesis G80 MK 2, DH - Years 2016-2020
Part: Headlight bulb

Let's discover the guide on how to remove and replace the low beam bulb of the headlight of the Genesis G80. First, open the hood of your car and start by removing the plastic protective cap found at the back of the headlight; then, unclip the metal spring, disconnecting the electrical connector to remove the bulb along with its module, as shown in the video. At this point, replace the low beam bulb with the new one, having the same base, following the video tutorial to the end for reassembly!

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Transmission Fluid in a Genesis G80?
How to Replace the Transmission Fluid in a Genesis G80?
Genesis G80 (2016-2020 / MK 2, DH) To replace the transmission fluid in a Genesis G80, lift the vehicle to access the underside near the engine compartment. You will find the protectiv…
Where to Find the Fuse Box of the Genesis G80
Where to Find the Fuse Box of the Genesis G80
Genesis G80 (2016-2020 / MK 2, DH) To quickly and safely locate the fuse box inside your Genesis G80 (model years 2016-2020), follow these steps. First, get inside the car and reach th…
How to Replace the Cabin Filter in the Genesis G80?
How to Replace the Cabin Filter in the Genesis G80?
Genesis G80 (2016-2020 / MK 2, DH) To replace the cabin filter in the Genesis G80, open the glove compartment on the passenger side to release the pins inside. Once the pins are releas…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos